i have Tactical Scope Kits available for Remington 700, Remington Model Seven, Winchester Model 70 and other versions of these rifles.
Kit Includes:
- 3~12x50MM VARIABLE POWER DUAL ILLUMINATED TACTICAL SCOPE -
- WEAVER SCOPE BASES -
- TWO SETS OF 30MM SCOPE RINGS – HIGH & LOW
= = = = = = = = = = = = = = = = = = = = = = = = = = = = =
NO FIREARMS ARE INCLUDED IN THIS SALE !!
= = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Kits fit the Following Listed Rifles:
+ Remington 40X, 78, 700 ADL/BDL, 721, 722, 725 – Short and Long Actions
+ Howa Center Fire Rifles – Short & Long Actions
+ Mossberg 1500, 1700 - Short & Long Actions
+ Smith & Wesson 1500, 1600, 1700 - Short & Long Actions
+ Herters U9 (Round Receiver)
+ BSA Monarch – Short and Long Actions
+ Churchhill Highlander
+ Weatherby Vanguard (shimming may be required)
+ Raptor
+ Winchester Model 70
+ Winchester Model 670
+ Remington Model Seven
+ Other variations of the above listed rifles.
NOTE: Kits use the same scope and rings - bases are different to fit the specified rifles.
SCOPE SPECIFICATIONS:
+ Magnification: 3X-12X Variable
+ Reticle: Illuminated (Red and Green) Tactical Mil-Dot
+ Scope Tube Diameter: 30mm
+ Objective Lens: 50MM
+ Scope Length: 13 Inches
+ Net Weight: 24.3 OZ
+ Eye Relief: 2.4 to 3.2 Inches
+ Exit Pupil: 16.7 to 4.2 MM
+ FOV (Feet at 100 Yards): 33.5 to 7.5
+ W&E: Finger Adjust Knobs - 1/8" @100 Yards
+ Finish: Matte Black
+ Multi-Coated Lenses
+ Bright Optics
+ Sharp Focusing
+ Eye Piece Focus Ring
+ Nitrogen Filled - Fog and Water Proof
+ Shock Proof – Heavy Duty Recoil Design
+ See-Thru Protective Lens Caps Included
+ New in Box with Manufacturer’s Limited Lifetime Replacement Warranty *
SCOPE RINGS:
Two sets of 30mm scope rings are included with this scope kit. The low rings are for mounting on rifles with a “smooth barrel” (ie: no sights) and the high set is for rifles with sights on the barrel to insure the scope’s 50mm objective lens will clear the rear sight. The high rings are also preferred by some hunters to be used as “see-thru” rings for close-in targets.
RINGS SPECIFICATIONS:
+ Strong Lightweight Aluminum
+ Non-Slip Mounting
+ Matte Black Finish
+ Low or High “See-Thru” Profile
+ 30mm Diameter
+ New in Box
+ Fits Weaver Style Bases or Picatinny Rail
+ Note: Rings Style May Vary Slightly from those shown in Photos
+ New Scope Rings with Manufacturer’s Lifetime Replacement Warranty
SCOPE BASES:
Original Weaver Bases made specifically to fit the rifles listed.
REPLACEMENT WARRANTIES:
The components of this SCOPE KIT are warranted by their respective manufacturers to be free of defects for reasons of workmanship and/or defective materials. Their warranties do not cover damage caused by improper installation, abuse or accidents and no other warranties are offered or implied. If one or more of the components fails to function properly and/or is found to be otherwise defective it/they will be repaired or replaced as follows:
* Scope: Buyer must return the scope to the manufacturer for inspection and testing. If found to be defective, the manufacturer will repair or replace the scope and return it directly to the purchaser.
* Mount and Rings: Buyer must return the mount and/or rings to the seller for inspection and testing. If found to be defective, the seller will replace the mount and/or rings and return them directly to the purchaser.
* No other warranties are offered or implied by the seller.
Ronhart International
Monument, CO
Trade for minimum following items:
+ Hunting cross bow
+ Small cap (5 or 10 round) magazines for Ruger Mini-14 and Mini-30
+ Bandolero holster for S&W N Frame revolver with 5 ˝ - 6 inch barrel.
+ Walnut stock for Ruger short action M77
+ Blackpowder revolvers with steel frame, caliber .36 or .44.
+ Single stage reloading press
Kit Includes:
- 3~12x50MM VARIABLE POWER DUAL ILLUMINATED TACTICAL SCOPE -
- WEAVER SCOPE BASES -
- TWO SETS OF 30MM SCOPE RINGS – HIGH & LOW
= = = = = = = = = = = = = = = = = = = = = = = = = = = = =
NO FIREARMS ARE INCLUDED IN THIS SALE !!
= = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Kits fit the Following Listed Rifles:
+ Remington 40X, 78, 700 ADL/BDL, 721, 722, 725 – Short and Long Actions
+ Howa Center Fire Rifles – Short & Long Actions
+ Mossberg 1500, 1700 - Short & Long Actions
+ Smith & Wesson 1500, 1600, 1700 - Short & Long Actions
+ Herters U9 (Round Receiver)
+ BSA Monarch – Short and Long Actions
+ Churchhill Highlander
+ Weatherby Vanguard (shimming may be required)
+ Raptor
+ Winchester Model 70
+ Winchester Model 670
+ Remington Model Seven
+ Other variations of the above listed rifles.
NOTE: Kits use the same scope and rings - bases are different to fit the specified rifles.
SCOPE SPECIFICATIONS:
+ Magnification: 3X-12X Variable
+ Reticle: Illuminated (Red and Green) Tactical Mil-Dot
+ Scope Tube Diameter: 30mm
+ Objective Lens: 50MM
+ Scope Length: 13 Inches
+ Net Weight: 24.3 OZ
+ Eye Relief: 2.4 to 3.2 Inches
+ Exit Pupil: 16.7 to 4.2 MM
+ FOV (Feet at 100 Yards): 33.5 to 7.5
+ W&E: Finger Adjust Knobs - 1/8" @100 Yards
+ Finish: Matte Black
+ Multi-Coated Lenses
+ Bright Optics
+ Sharp Focusing
+ Eye Piece Focus Ring
+ Nitrogen Filled - Fog and Water Proof
+ Shock Proof – Heavy Duty Recoil Design
+ See-Thru Protective Lens Caps Included
+ New in Box with Manufacturer’s Limited Lifetime Replacement Warranty *
SCOPE RINGS:
Two sets of 30mm scope rings are included with this scope kit. The low rings are for mounting on rifles with a “smooth barrel” (ie: no sights) and the high set is for rifles with sights on the barrel to insure the scope’s 50mm objective lens will clear the rear sight. The high rings are also preferred by some hunters to be used as “see-thru” rings for close-in targets.
RINGS SPECIFICATIONS:
+ Strong Lightweight Aluminum
+ Non-Slip Mounting
+ Matte Black Finish
+ Low or High “See-Thru” Profile
+ 30mm Diameter
+ New in Box
+ Fits Weaver Style Bases or Picatinny Rail
+ Note: Rings Style May Vary Slightly from those shown in Photos
+ New Scope Rings with Manufacturer’s Lifetime Replacement Warranty
SCOPE BASES:
Original Weaver Bases made specifically to fit the rifles listed.
REPLACEMENT WARRANTIES:
The components of this SCOPE KIT are warranted by their respective manufacturers to be free of defects for reasons of workmanship and/or defective materials. Their warranties do not cover damage caused by improper installation, abuse or accidents and no other warranties are offered or implied. If one or more of the components fails to function properly and/or is found to be otherwise defective it/they will be repaired or replaced as follows:
* Scope: Buyer must return the scope to the manufacturer for inspection and testing. If found to be defective, the manufacturer will repair or replace the scope and return it directly to the purchaser.
* Mount and Rings: Buyer must return the mount and/or rings to the seller for inspection and testing. If found to be defective, the seller will replace the mount and/or rings and return them directly to the purchaser.
* No other warranties are offered or implied by the seller.
Ronhart International
Monument, CO
Trade for minimum following items:
+ Hunting cross bow
+ Small cap (5 or 10 round) magazines for Ruger Mini-14 and Mini-30
+ Bandolero holster for S&W N Frame revolver with 5 ˝ - 6 inch barrel.
+ Walnut stock for Ruger short action M77
+ Blackpowder revolvers with steel frame, caliber .36 or .44.
+ Single stage reloading press