7.62x39 in the sks ... I had to share my new go to load ,
I shot some 314-175 saeco clone gas checked bare unsized @ 179 gr weight .(made by NOE. and 15 gr 4227imr great load drops brass 1-2 feet from my rifle works action 99% of the time if not all ..never had a failure but was a little too close for comfort .i would like it to throw brass a little further so i wont exp a stovepipe jamb .. accuracy was great for no gas check @ 1foot6'' open sited old man eyes @ 400 yds / next jumped up to 16 grains 4227 Imr same boolit 314-175 clone only these were plain base unsized @183 gr. weight , wow power increase accuracy 1 foot @ 400 yards in my sks , this is good enuff for hog hunting .. so 16 gr 4227imr in a 7.62x39 in a russian sks , yugo owners may need another .3-.5 grains to work in theirs' they have a stronger recoil spring roughly same point of aim for the factory 154 gr soft point made by tula @ 400 yds, maybe a couple inches lower ...
I shot some 314-175 saeco clone gas checked bare unsized @ 179 gr weight .(made by NOE. and 15 gr 4227imr great load drops brass 1-2 feet from my rifle works action 99% of the time if not all ..never had a failure but was a little too close for comfort .i would like it to throw brass a little further so i wont exp a stovepipe jamb .. accuracy was great for no gas check @ 1foot6'' open sited old man eyes @ 400 yds / next jumped up to 16 grains 4227 Imr same boolit 314-175 clone only these were plain base unsized @183 gr. weight , wow power increase accuracy 1 foot @ 400 yards in my sks , this is good enuff for hog hunting .. so 16 gr 4227imr in a 7.62x39 in a russian sks , yugo owners may need another .3-.5 grains to work in theirs' they have a stronger recoil spring roughly same point of aim for the factory 154 gr soft point made by tula @ 400 yds, maybe a couple inches lower ...